I was really pleased with not only the easy of installation but also the looks. It also helps the front handling of my 2000 S10 noticeably. Highly pleased with this product.
From Las Vegas
Reviewer:
From A Customer
Own this product - Yes
Easy install,no rear sway at all since install,performance could not be any better.Installation bolts however werent long enough, they allowed for the thickness of the swaybar,its bushings, and the frame,and didt allow for the angle or pitch of the frame at the bolt on location wich increases the required bolt length.
Great!
Review for:
Front 1-1/4 inch Diameter Sway Bar
From Maryland
Reviewer:
CHADWICK SPRADLING
Own this product - Yes
Very good product. Went on quickly in the stock location and seems to have improved the handling from the front suspension over the smaller, stock bar. Cant wait to buy one for the back.
Belltech 1 1/4 inch front swaybar
Review for:
Front 1-1/4 inch Diameter Sway Bar
From Southern California
Reviewer:
From A Customer
Own this product - Yes
Kit was complete with all necessary parts. The addition of this bar really helped the handling of my truck. Money well spent.
Outstanding perfoormance
Review for:
Front 1-1/4 inch Diameter Sway Bar
From Chesapeake, VA.
Reviewer:
From A Customer
Own this product - Yes
Vehicle: 1995 CHEVY/GMC TRUCK S-10 Pickup/Sonoma
I have a 1995 Chevy S10 2.2, As any one knows this truck stock is in need of some help on the performance side. I install the 1 ¼” anti sway bar and was completely amazed at the way it can take a corner now. It was very easy to install and I would recommend this to any one.
awesome
Review for:
Front 1-1/4 inch Diameter Sway Bar
From CA
Reviewer:
From A Customer
Own this product - Yes
sway bar is a must if you are lowered or want better handling.
Helps alot with body roll and seems to stiffen up suspension.
Great
Review for:
Front 1-3/8 inch Diameter Sway Bar
From San marcos Texas
Reviewer:
From A Customer
Own this product - Yes
I have a 2000 chevy Tahoe and put this on i also put on also with some 2 inch eibach lowering springs and billstein shocks, but as far as the anti-sway bar man this thing makes a big diffrence espically with the turns my truck used to be able to handle tight or hard turns at 30 - 50 but with 122,000 miles not really anymore. However now with this bad boy i can... the first time i took a u turn under the freeway it was worth every penny (and of course i was able to step on it all the way around) Also with the springs and this the ride qulity in general has improved. But with the sway bar man i can really swang and bang it around those corners and in and out of lanes. Def a good Buy
Belltech Sway Bars on 97 T100
Review for:
Front 1-1/4 inch Diameter Sway Bar
From Vancouver, USA
Reviewer:
From A Customer
Own this product - Yes
Vehicle: 1997 TOYOTA T100
Great product and installation instructions. Excellent corning performance with front and rear set and Billsteins. Able to take a 25mph on-ramp at 60mph plus!! Removal of one front wheel facilitates snaking the old part out and the new one into place with no suspension disassembly required.
Awesome Product
Review for:
Front 1-3/8 inch Diameter Sway Bar
From Montana
Reviewer:
Joshua Norquist
Own this product - Yes
Great product and easy to install. Make sure you check to see if you need the adapter kit #5404. Thanks Performance Center!
sway bar
Review for:
Rear 1 inch Diameter Sway Bar
From virginia
Reviewer:
Clayton Christie
Own this product - Yes
shipping was quick, directions were O.K. but you have to look closely. a few pieces of hardware needed to be grinded to fit but all in all it made an incredible difference in cornering and sharp turns. Handles more like a car.2000 f150 xlt 4.2l
Some of the reviews may have been edited by our moderators in order to comply with our review guidelines.
(4 
(1