K&N 63-2566 Aircharger Offroad Air Intake Kit
Retail Price: $321.99
Sale Price:
$207.20
Shipping: Free!
Features
- Engineered By K&N
- Filters Air More Effectively Than A Stock Paper Element
- Allows More Air into Engine
- Easy Bolt-On Installation
- Million Mile Limited Warranty
HP & Torque
8-10 HP/10 ft lbs Torque
Installation
Designed to replace the restrictive factory air filter housing. This is a BOLT-ON kit. Installation normally takes 20-30 minutes and includes all the necessary hardware. Only regular hand tools required. Comes with complete instructions.
Smog Legal
49 States (not California legal) Smog Legal
Tech Notes
To clean the filter, first brush off any large embedded dirt. Then spray on the K&N cleaner and let it soak for 10 minutes. Next, Rinse off the element with LOW pressure water. (Always flush from the clean side to the dirty side.) Then allow filter to dry NATURALLY. After filter has dried re-oil with K&N air filter oil only. Apply evenly to entire filter making sure to oil down into each pleat. Then re-install making sure the element seats properly in the filter case.
Description
Airchargers are designed to be less restrictive compared to the stock air management system. Low restriction air filters provide quicker throttle response and more power throughout the RPM range. Additionally, it is important to note, if the stock air cleaner box has emission control devices and/or hoses attached, these parts may not be re-installed on a new Aircharger assembly. Each Aircharger has a specially designed filter element consisting of woven cotton fabric sandwiched between two layers of wire mesh screen. The screen and fabric combination creates a grid-like effect which actually straightens and smoothes the incoming air as it passes through the filter. Air moving in a straight column moves faster than turbulent air, hence more power is gained.
Manufacturer Information
Item: Performance Intake Kit Aircharger; Ford Mustang V6-4.0L; 2005
Item Number: 63-2566
Approximate Item Package Dimensions: 22" x 14" x 12"
Approximate Item Package Weight: 9 lbs
Optional Items
Product Reviews
Average based on 2 reviews. Write a review. |
Write an online review and share your thoughts with other customers about K&N Aircharger Offroad Air Intake Kit.
K&N air intake
Reviewer: From A Customer Own this product - Yes
From 19105 Harkness Lane
|
exellent shipping, only problem is having a more acurate picture because I thought I was getting the Typoon intake from K&N, but all was good and i am a satisfied customer.
Cold Air Intake
Reviewer: gene fuller Own this product - Yes
From Kansas - Vehicle: 2005 FORD Mustang
|
I recently purchased a 2005 Mustang with a 4.0 litre engine. I selected the 4.0 litre because of pricing in comparison to the V8 and gas mileage. Although the 4.0 performed fine stock, I've always liked to tinker with things. I started looking for after market performance parts and discovered Performance Center's web page. Read the information about the cold air intake and decided to give it a try. It's given the engine a different sound. One similar to what you would hear when you take the air cleaner off a carborated engine. As fair as a performance increase, without putting it
on dyno, maybe a small change.
|
Some of the reviews may have been edited by our moderators in order to comply with our review guidelines. |