Banks 47443 Banks PowerPack System

1999 Model Year Vehicles have a build date prior to 1/99 (the build date of the vehicle is located on a tag inside the driver's door) and are equipped with a catalytic converter.

1999.5 (early) Model Year Vehicles have a build date prior to 1/99 and are NOT equipped with a Catalytic Converter. The intake manifold inlets measure nominally 2-inches diameter.

1999.5 (late) Model Year Vehicles have a build date of 1/99 or later, and are NOT equipped with a catalytic converter. The intake manifold inlets measure nominally 3-inches diameter. Due to the superior 3-inch inlet design over the earlier 2-inch inlet and changes in the turbocharger, the TwinRam intake manifold and compressor outlet elbow are unnecessary and are not included in the Techni-Cooler or PowerPack systems.

Banks OttoMind: When ordering a system with a Banks OttoMind, it is necessary to determine your vehicles calibration code. The calibration code can be found on a sticker affixed to the ECU housing. The calibration code will be a 4-digit code with 3 letters and a number (such as NVK6). To identify the code on your vehicle, first look for a tag on the forward end of the driver's door. If the tag is not present or is illegible, remove the black plastic box covering the computer, located under the dash to the left of the drivers feet. The code tag will be visible on the back of the computer, facing toward the rear of the vehicle. Please call (800) 719-8100 to confirm OttoMind availability for your Vehicle Calibration Code.

Exhaust Extension Kits Vehicles with longer wheelbases require extension kits with use of Banks Stinger, Stinger-Plus, or PowerPack Systems.