Write an online review and share your thoughts with other customers about Belltech Front 2 Inch Drop Lowering Spindle Set.
Belltech Drop 2
Reviewer: From A Customer Own this product - Yes
From Bremerton, Wa - Vehicle: 1984 TOYOTA Pickup
|
These Spindles provided a 2inch drop for the front of my 95 Toyota Pick-up. Installation was a breeze and getting the proper alignment was not a problem either. These can be installed easily by the DIYer with common sense and a few hand tools. I would recommend getting a front end alignment afterward. Steps taken: Paint, R/R stock spindles, install new drop spindles, align, drive, and enjoy. For the whole experience I would recommend dropping the rear with belltech leaf springs or blocks. Both provide 3inch drop and finish with nitro-drop shocks.
Great Product Fast Shipping
Reviewer: From A Customer Own this product - Yes
From Dallas, TX
|
These spindles are great and shipping was very fast!
Better handeling
Reviewer: From A Customer Own this product - Yes
From Cali - Vehicle: 1993 Pickup TOYOTA
|
The spindles are easy to install and they make the truck handle much better I really like the new stance that they give my truck.
Great
Reviewer: Joel wasson Jr. Own this product - Yes
From Cantonment, FL - Vehicle: 1986 Pickup TOYOTA
|
This product has excellent results, my pickup looks great! For the do it yourselfers, this product doesn't send any bearings or balljoints, it would be best to get new lower and upper ball joints, inner and outer bearings and races, new dust seals, and high temp. greece. It took about 3 hours to fully assemble with only hand tools, and the knowledge of lowering vehicles before. Aftermarket rims are hard to find and very pricy for this pickup, so know exactly what you want and make sure it will fit with the new 2 inch drop, it's best to keep the rim size no higher than a 16, and tire
size of 205. The turn radius was reduced, not by much, and i had to take the wheel waits off, keeping the stock rims (14's with a 195 tire) will be a little difficult to work around with, the lower ball joints will just clear the inner part of the rim.
|