Hell on wheels
Review for: Twin 52mm High-Flow EFI Throttle Body
|
|||
this is the best upgrade I have done to my truck yet, the throttle response is quicker, I can feel the difference in the torque, have no problems pulling a loaded trailer, passing grear stays with you until you let go of pedal. I recommend this for 98 dodge with a 360 engine, to early to say about gas milage. |
|||
|
|||
950 not working
Review for: P/N 534-169 Injector Pod Upgrade Kit For 4-bbl Pro-Jection Throttle Bodies
|
|||
We installed the new POD from you. All went well, but could not distinguish it from the earlier one. Installed the new injectors, which were a different style from the previous ones. The engine started for about 15 seconds and has not started since. I now have four 950 units or parts there of and none have worked as they should have. Some have run and when shut off they would not restart. I SHOULD HAVE GOTTEN A CARB. I could not recommend this unit to anyone. Holley has no fix for it apparently. I have a D1 2V that works well on my Mustang. |
|||
|
|||
|
Holley 4in VoluMAX 28 micron screen with Viton seals
Review for: 4in VoluMAX Filter With 28 Micron Viton Screen
|
|||
This item is over priced but offered at the absolute lowest price by Performance Center. Installation was easy. Quality is excellent. Performance is excellent. The threaded mounting stud that came with the filter did not fit my vehicle so I went to the hardware store and got what I needed. A great item! |
|||
|
|||
|
throttle body
Review for: Twin 52mm High-Flow EFI Throttle Body
|
|||
everything fit and worked great thanks did not have to do any modifications |
|||
|
|||
|
GOOD PRODUCT
Review for: 6in 6-Rib Lower Drive Pulley
|
|||
THE FINISH OF THE PRODUCT ITS NOT GOOD BUT IT WORKED JUST FINE |
|||
|
|||
|
Input Shaft for mini blowers
Review for: Input Shaft & Coupler
|
|||
This is a nice part. My reason for purchase was to eliminate the splined shaft/pulley (only mercruiser used this) and use off the shelf keyed pulleys. This part services various blowers and the weiand 177 is not listed but it will work for certain applications. Holley should update the application data. Mine is a BBC. TRUCK PERFORMANCE PRICE WAS 40% less than Summit!!! |
|||
|
|||
|
tune up
Review for: .035in Hole Size Tube Type Accelerator Pump Discharge Nozzle
|
|||
after recently installing a holley i noticed less than optimal performance on full open throttle. Replacing the pump nozzle made a HUGE differnce. Its best to go 2 sizes up from what you have and the replacement takes less than 1 minute. |
|||
|
|||
|
Gaskets
Review for: Blower Manifold Gasket
|
|||
I was very pleased with the quality of the product and had fast convenient shipping on the item as well. |
|||
|
|||
|
Does what they say it does; really quick and easy to install
Review for: Twin 52mm High-Flow EFI Throttle Body
|
|||
I put this on my 99 Dodge Ram 1500 with the 318. The modification to the plate they talk about it even quicker than expected. I noticed an immediate throttle response and HP once above about 1200-1500 rpm. The low end torque loss everyone talks about isn't noticable unless you're gonna drag race or tow to maximum capacity. I haven't noticed it yet. Great product. The tapped holes for the TPS sensor are a little tight so be careful not to strip out your screw. |
|||
|
|||
|
Holley Fuel Pressure Regulator
Review for: Standard Finish Performance Carburetor Fuel Pressure Regulator
|
|||
Very Very satisfied with product and very pleased with price.
Will definetely buy again. |
|||
|
|||
| Some of the reviews may have been edited by our moderators in order to comply with our review guidelines. |
